Product ID:AQUATAPOXY GEL PART A, 35-200
MSDS Date:10/02/1990
FSC:8040
NIIN:00N021600
Kit Part:Y
MSDS Number: BLXXC

AMERICAN CHEMICAL CORP

5231 NORTHRUP AVE
ST LOUIS, MO 63110
US

Emergency Phone: 314-664-2403

Info Phone: 314-664-2403

Cage: 5T256

AMERICAN CHEMICAL CORP

HAYWARD, CA 94544 US

Telephone: 415-475-0888

Cage: 5T256

SILICA, AMORPHOUS FUMED; (SILICA)

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 20-25%

OSHA PEL 6 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

EPOXY RESIN

CAS: 25805-99-8

PALYGORSKITE; (MAGNESIUM ALUMINIM SILICATE)

CAS: 12174-11-7

RTECS: RT6400000

BELIEVED TO BE A CANCER HAZ TO HUMANS. RESULTS OF

RTECS: 9999999ZZ

SHOWN TO BE NEGATIVE IN SOME INVITRO ("TEST TUBE")

RTECS: 9999999ZZ

KAOLIN

CAS: 1332-58-7

RTECS: GF1670500

Fraction By Weight: 15-20%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9293

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 8-11%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:MAY CAUSE SLIGHT TRANSIENT
(TEMPORARY) IRRIT. CORNEAL INJURY IS UNLIKELY. SKIN:MAY CAUSE
ALLERGIC REACTION IN SUSCEPTIBLE INDIVIDUALS. PRLNGD EXPOS NOT
LIKELY TO CAUSE SIGNIFICANT IRRIT. RPTD EXPO S MAY CAUSE IRRIT. A
SINGLE PRLNGD EXPOS IS NOT LIKELY TO RESULT IN MATL BEING ABSORBED
THROUGH SKIN IN(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:HARMFUL AMTS. INGEST:SINGLE DOSE TOX
IS LOW. INHAL:VAPS ARE UNLIKELY DUE TO PHYSICAL PROPERTIES.
SYSTEMIC & OTHER EFTS:EXCEPT FOR SKIN SENSIT, RPTD EXPOS TO LOW
MOLECULAR WEIGHT EPOXY RESINS OF TYPE ARE NOT ANTICIPATED TO CAUSE
ANY SIGNIF EFTS. A POORLY CHARACTERIZED SAMPLE OF LOW WEIGHT EPOXY
RESIN(SUPP DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE:FLUSH WITH LARGE QUANTITIES OF WATER FOR AT LEAST 15
MINUTES. CALL MD. SKIN:WASH OFF WITH FLOWING WATER. INHAL: REMOVE
TO FRESH AIR IF EFFECTS OCCUR. CALL MD. INGEST:CALL MD IMMEDIATELY
.

Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:FOAM, CO2 OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA/FULL PROT EQUIP.
WATER MAY BE HELPFUL IN KEEPING ADJACENT CNTNRS COOL.AVOID
SPREADING BURNING LIQ W/H2O USED FOR COOLING PURP
Unusual Fire/Explosion Hazard:KEEP WORK AREAS FREE OF HOT METAL
SURFACES AND OTHER SOURCES OF IGNITION.

Spill Release Procedures:KEEP SOURCES OF IGNITION AND HOT METAL
SURFACES ISOLATED FROM THE SPILL. MATERIAL MAY FLOW SLOWLY. SCRAPE
INTO CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE NEAR FLAME, HEAT OR
STRONG OXIDANTS. DO NOT STORE IN DIRECT SUNLIGHT. STORE IN COOL,
DRY AREA. AVOID PROLONGED STORAGE ABOVE 100F.
Other Precautions:KEEP CONTAINERS TIGHTLY CLOSED WHEN NOT IN USE. AVOID
PROLONGED OR REPEATED CONTACT WITH SKIN.

Respiratory Protection:RESPIRATORY PROTECTION SHOULD NOT BE NEEDED. IF
RESPIRATORY IRRITATION IS EXPERIENCED, USE A NIOSH/MSHA APPROVED
AIR- PURIFYING RESPIRATOR.
Ventilation:GENERAL MECHANICAL VENT IS SUFFICIENT FOR MOST CONDITIONS.
LOCAL EXHAUST VENTILATION MAY BE NEC FOR SOME OPERATIONS.
Protective Gloves:IMPERMEABLE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR CLEAN, LONG-SLEEVED, BODY-COVERING
CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EFTS OF OVEREXP:OF TYPE (DIGLYCIDYL ETHER OF BISPENOL A) HAS BEEN
REPORTED TO PRODUCE SKIN CANCER IN HIGHLY SENSIT STRAIN OF MICE.
HOWEVER, HIGH LEVELS OF IMPUNITIES (INCL A KNOWN ANIMAL SKIN CARC)
CO MPROMISE VALIDITY OF FINDINGS. EPOXY RESIN THAT IS
REPRESENTATIVE OF CURRENT MANUFACTURING PROCESS IS NOT (SEE ING 6)

HCC:V7
Boiling Pt:B.P. Text:>200F,>93C
Spec Gravity:1.24
Solubility in Water:NEGLIGIBLE
Appearance and Odor:MASTIC CONSISTENCY-FAINT EPOXY ODOR
Percent Volatiles by Volume:<1

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND BASES, SELECTED AMINES, OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMPOSITION IN THE PRESENCE
OF AIR MAY YIELD CO & CO2.

Waste Disposal Methods:DISPOSE OF ACCORDING TO ALL LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.